409.1 Kkl Drivers
• Click the ‘Test’ button. • If everything is good, it should display 'Interface Status: Found!' • You can now connect other end of cable to car. Turn on ignition.
It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. Cable must be plugged into the vehicle with ignition ON. Test the cable with each COM Port from 1 to 4 in Windows Device Manager. Make sure that the driver is installed and configured as explained in Step 1. It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. Cable must be plugged into the vehicle with ignition ON. Test the cable with each COM Port from 1 to 4 in Windows Device Manager. Make sure that the driver is installed and configured as explained in Step 1.
The following dialog should appear: 12. This dialog warns you that we haven't paid Microsoft a pound of flesh to certify the driver. You're going to have to click the [ Continue Anyway] button.:-) Note: If your Windows Security Settings policy is 'undefined' you may need to set it to 'warn' to be able to continue. The following dialog should appear: 14. Click the [ Finish] button to complete the installation. Start VAG-COM.
Unextract the file into any folder. Then while your cable is connected to the computer — go Device Manager. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager You'll see a device similar to 'USB Serial Port' under either 'Other devices' or 'Ports (COM & LPT)'.
On the screen above: Select ' Search for the best driver in these locations' Check ' Include this location in the search:' Use the [ Browse] button to find the VAG-COM folder (Usually C:Program FilesVag-Com, unless you chose a different folder when you installed the software) Click [ OK] 8. The following dialog should appear: 9. Click the [ Next >] button. If you get a Windows message stating 'This hardware will not be installed. Contact your system administrator' then you need to do the following A) Login to Windows with Administrator rights. B) Go into Start -> Settings -> Control Panel -> System -> Hardware -> Driver Signing C) Select Warn and choose 'Prompt me each time to choose an action.' D) Next, repeat the driver installation starting in Step 3.
Let it install. STEP 2: Discover Port Number that VAG-COM KKL Cable is Using Go to Control Panel. • Windows Vista/7/8/10: Control Panel » System » Device Manager • Windows XP: Control Panel » System » 'Hardware' tab » Device Manager Expand 'Other devices' or 'Ports (COM & LPT)'.
On the screen above: Select ' Search for the best driver in these locations' Check ' Include this location in the search:' Use the [ Browse] button to find the VAG-COM folder (Usually C:Program FilesVag-Com, unless you chose a different folder when you installed the software) Click [ OK] 8. The following dialog should appear: 9. Click the [ Next >] button.
I may have to shell out for one because it looks really pukka. Though I may get it shipped to friends in the US as I resent paying that Scottish oaf at the treasury all my hard earned cash! Let me know how you get on. Hi Lee, Again, thank you for your kind help. I've now persuaded the beast to work and it was exactly as you said. I decided to call FTDI this afternoon and the guy there was massively helpful if walking me through the changes. He also advised another couple: In the 'Advanced settings for [COM 1 (or other port that is selected)], under: USB Transfer Sizes, change 'Receive (Bytes)' to 64 BM Options, change 'Latency Timer (msec)' to 3 As you say, I now need to register the software for $99 - I assume this will active more functions?
409.1 Kkl Drivers Test
Features Working with a computer, this item performs the functions of a factory VAG-1551 or VAG-1552 scan tool and more. This item is fully compatible with almost all VW/AUDI/SEAT/SKODA vehicles, including those with KKL, but without CAN-BUS.
SAFETY WARNING: Never start and run your engine inside of a closed garage. Always make sure there is good ventilation to prevent carbon monoxide poisoning. Carbon monoxide fumes are produced by your engine’s exhaust gases. Compatible Product: VAG KKL 409.1 OBD2 USB Diagnostic Interface Cable 1. Go to and download the VCDS-Lite Software and the Drivers (CDM v2.08.30 WHQL Certified Windows Drivers) 2. Now plug the VAG-COM 409.1 USB cable into your PC. Windows will automatically detect the interface and attempt to find the correct drivers. 3. Extract and Open the “CDM 2.08.30 WHQL Certified for VAG 409.1” folder that you downloaded. Run the “CDM 2.08.30 WHQL Certified” installer to install the required Windows Drivers for the cable.
Commercial use and distribution of the contents of the website is prohibited without express written consent of the author. Purchase the VAG KKL Cable here.
Driver Model OS Original Upload Date Last Modification Driver File File Size Compatible Computer Models Availabilty To Instalation Manager Kkl Vag Com 409.1 60402.1 For Windows 7 32 bit 8/11/2015 2/21/2017 tapc-60402.1.exe 191kb Lenovo 2689PZG, IBM 1843A19, NEC EASYNOTE PB11400006, ASUS BM5275, Acer AOA150p/BGW, HP PX813AA-ABX a1000.fi, Gigabyte M1028, Packard Bell IMEDIA MC 9601, Compaq ER043AA-UUB SR1618HL FD440,, and more. Kkl Vag Com 409.1 61.1890 For Windows 7 64 bit 11/1/2014 1/26/2017 aqaz-61.1890.exe 26kb Lenovo 7665WRU, Compaq ER100AA-ABA SR1625NX NA541, Lenovo 20AVCTO1WW, FIC LM10W, Packard Bell IMEDIA I4580 FR, M&A E10IS, HP 100-5152, LG R490-K.ARA2BA3, Lenovo 7484W76, Seneca V63909,, and more.
The vendor had e-mailed me directing me to the FTDI website to download the drivers - you were correct! I had opened the dongle and the chip is an FTDI 232BL. I run XP, so downloaded the driver 2.00.00 However, I still can't get it to run: Having plugged in the cable, On the VAG-COM options menu, selecting USB and 'Test' returns Port status: OK Interface: Not Found!
VAG COM driver for 409.1 USB OBD Scanners. The exact appearance of the screens will vary based on the version of Windows being used. Q: Why my VAG KKL 409.1 driver doesn't work after I install the new driver? Description: VAG KKL 409.1 driver setup Version: 4.2.8 Date: 09 Sep 2014 Filesize: 0.81 MB Operating system: Windows XP, Visa, Windows 7,8 (32 & 64 bits).
• It should be noted that VAG-COM 409.1 KKL cable does not work on vehicles running on CAN-BUS System. • Cable must be plugged into the vehicle with ignition ON. • Test the cable with each COM Port from 1 to 4 in Windows Device Manager. • Make sure that the driver is installed and configured as explained in Step 1. More Troubleshooting Tips: • Only Audi, Volkswagen, Skoda and Seat vehicles are supported. Other brands will only work for generic OBD-II functions.
(You may need to right click the installer and Run as Administrator). 4. After the driver installation is complete, we will need to setup the COM Port for the interface. Go to Control Panel > Device Manager and find the device under “Ports (COM & LPT). It should be called “USB Serial Port” and you will see the COM port number that was assigned to it. If the COM port number is 1, 2, 3 or 4, you will not need to configure the port. If it is not in the port range from 1-4, you will need to right click the “USB Serial Port”, then click “ Properties”, then click the “Port Settings” tab, then click “Advanced”. Using the drop down menu, select a COM Port Number from 1-4. Click OK and OK to exit out.
Will this then operate as the KEY-USB product from Ross-Tech selling for $249, or does the KEY-USB from Ross-Tech perform other functions in addition? Thanks again for your time and patience - this site is a great concept! Kind regards Ian VW Passat 2002 TDI 130 estate.
If you choose to install it someplace other than the default location, make a note of folder you're installing it to. Plug your Ross-Tech USB Interface to your PC's USB port (It is not necessary to connect the interface to a car yet). A message like this should appear on your PC's Taskbar: NOTE: If the new Hardware Found Wizard popup does not appear when you plug in your interface, go into Device Manager and look for the interface. In Windows XP, you can typically find the Device Manager by RIGHT-CLICKING on My Computer then selecting Manage. Your Ross-Tech USB Interface should be under Universal Serial Bus (USB) Controllers or under Other Devices.
Allow the software you just downloaded to install itself on your PC. If you choose to install it someplace other than the default location, make a note of folder you're installing it to. Plug your Ross-Tech USB Interface to your PC's USB port (It is not necessary to connect the interface to a car yet). A message like this should appear on your PC's Taskbar: NOTE: If the new Hardware Found Wizard popup does not appear when you plug in your interface, go into Device Manager and look for the interface. In Windows XP, you can typically find the Device Manager by RIGHT-CLICKING on My Computer then selecting Manage.
5. Connect the VAG-COM 409.1 cable to your car’s OBDII diagnostic port and turn your key to the 2nd turn to turn on your ignition. 6. Run the VCDS-Lite-1.2-Installer that you downloaded to install the VCDS-Lite software. 7. Now you can start the VCDS-Lite 1.2 software from the Desktop shortcut icon.
Instructions: • • • • Stage 1: Install the USB drivers for the interface To get your interface up and running, you need to install software device drivers for the USB interface. If you are installing the package on a PC that is connected to the internet, Windows 7 can automatically locate and install suitable drivers via Windows Update. Just connect the interface to a USB port on the computer - Windows will then show a notification that it is locating and installing device drivers.and then another message when the installation is complete. If the PC you are installing on is not connected to the internet, you will need to download the drivers via another PC and install them before connecting the interface.
• Click 'Options' button. • You will see 'Select COM Port' box. Select the 'COM Port' number as explained in Step 2.
If the COM port number is above 4, then we'll have to change it so it's between 1-4. Right-click on 'USB Serial Port' and click on 'Properties' — as per below pic: Then: • Click: Port Settings • Click: Advanced • For 'COM Port Number' — you MUST choose any number between 1-4. Now let's test if everything is working. Move onto next step below. STEP 3: Test Everything is Working Cable should be plugged into computer. • Start VCDS-Lite software.
• Uncompress the file. Double-click on 'Install.exe' to install the drivers. • Plug cable into any computer's USB port. • 'Found New Hardware Wizard' will start and it will ask you 'Can Windows connect to Windows Update to search for the software?' Select 'Yes'. • Select 'Install the software automatically'. • After the installation is complete, click 'Finish'.
How to Install Vag com 409.1 KKL USB Drive on Windows Vag com 409.1 is KKL USB diagnostic interface for automobiles. You have to Install KKL USB Drive before you use Vag com 409.1 KKL USB. Do you know how to do it?
Click the [ Options] button. In the 'Select COM Port' box, select USB. Click the [Test] button. The results should look like this (it may have additional information in the Port Test dialog). Click [OK] and click [Save] 17.
Select a port number between 1 and 4 then press ok (if possible choose one that is not shown as 'in use'): Once that is done, click ok until you are back to the Windows desktop. Stage 3: Download and install the VAG-COM Software Next you need to download VAG-COM 409.1 from the Ross-Tech website: (Use the link for version 409.1 - shown as 'For MODERN SERIAL Interfaces') Save the file to your computer, then run it. When installing VAG-COM on Windows 7, it is important that you do NOT install it within the 'Program Files' folder. Windows 7 protects this folder and prevents programs from writing files into it, which would prevent VAG-COM from working. So when you see the screen showing the location for installation, change it to another folder, e.g. C: Ross-Tech VAG-COM: Once you have changed the installation location, click install, and wait for it to complete installation.
• 'Found New Hardware Wizard' will start once again because there are two drivers for this cable. • Go through the same steps as explained above to install this second driver. If install is successful, move onto Step 2. If installation fails, see below: Troubleshooting: If Drivers Failed To Install. Installation failed?.
How to select driver? If you are looking for an update, pickup the latest one. If your driver isn't working, use the driver having the same OEM with the your laptop/desktop brand name. How to Install Vag com 409.1 KKL USB Drive on Windows Vag com 409.1 is KKL USB diagnostic interface for automobiles. You have to Install KKL USB Drive before you use Vag com 409.1 KKL USB. Do you know how to do it? If not, please just follow the Vag com 409.1 KKL USB Drive installtion steps beolow.
409.1 Kkl Drivers License
Click on Options. Under Select COM Port, choose the COM Port Number you selected prior in the Device Manager and click on Test. If the connection was successful, a box will pop up to let you know and you will be able to save the settings and begin using the software. Copyright © 2014 CVO Electronics, Inc. All rights reserved.
VAG KKL 409.1 VAG-COM 409.1 KKL Software Download VAG KKL 409.1 is China obd 409.1 KKL USB cable. Have the functions of a factory VAG-1551 or VAG-1552 scan tool and more. Need free download link for Vagcom 409.1 KKL USB Software? USB KKL VAG-COM 409.1 KKL VAG 409.1 USB Here is the free download link for you VAG-COM 409.1 KKL Software Vagcom 409.1 KKL USB Driver VAG KKL 409.1 is fully compatible with almost all for VW/ for AUDI/ for SEAT/ for SKODA vehicles including those with KKL, but without CAN-BUS. VAG-COM 409.1 KKL interface (adapter) is used as an interface and a USB cable to connect a for VW/ for AUDI vehicle to a PC with USB port for on-board diagnostics (OBD).
VAG KKL USB 409.1 Fiat Ecu Scan KKL Switch Fiat ALFA Note: These instructions are only to be used in case the automatic driver installation is not successful. These instructions are for Windows XP. Installation under Windows 98/ME/2000 is similar, but not necessarily identical. Make sure you have already downloaded and installed VAG-COM on your PC before following these instructions. Allow the software you just downloaded to install itself on your PC.
Kkl 409.1 Software Download
That should be all the preparation done. The final step is to open the VAG-COM software by that shortcut, go into the Options page, then select the COM port your interface is configured on: Once you've selected the port, click Test, then OK. You should now be able to use the software.
If it's there, Right-Click it and then select Update Driver. Then you can start at Step 4 in the instructions below. The New Hardware Found Wizard should appear: 5. On the screen above, select ' Install from a list or specific location (Advanced)' then click the [ Next >] button. The following dialog should appear: 7.
Kkl Vag Com 409.1 61.182.14 For Windows 10 64 bit 9/2/2014 7/11/2016 qfie-61.182.14.exe 154kb ASUS W3A, HP EG158AA-ABF m7171.f, Sony VGNZ798Y/X, HP FL399AA-ABZ m9495it, HP HP compaq nx4820, Panasonic CF-29NAQC9BM, Lenovo ThinkPad Edge E431, Fujitsu FMVF705BDR, Compaq EG215AA-ABG SR1660AN AN540, HP G5144fr-m, HP HPE-430it, HP PS139AA-ABX a710.fi, Lenovo ThinkPad Tablet 2, HP HP Pavilion dv5000, IBM IBM System X3100 M4 -[2582K1G, HP HPE-355uk,, and more. Kkl Vag Com 409.1 61.1794 For Windows 8 6/27/2015 2/14/2017 qrsq-61.1794.exe 114kb HP P6747ch-m, IBM 1832BG1, Dell Dimension 9100, Sony SVE14112ENB, M&A MADB43LD, Compaq VT606AA-AKL CQ3275L, AnabelleB Argyle M261V, Packard Bell Imedia S3250, Sony 99574, Panasonic CF-18NHH71BM, Lenovo ThinkCentre Edge 71, HP VS417AA-ABF s5224f, HP HP ENVY 17 3D Notebook PC, Fujitsu FMVLRB50P, IBM IBM System x3650 -[7979BJU, HP HP Compaq nc4400,, and more. Kkl Vag Com 409.1 602.131.1 For Windows 7 32 bit 7/6/2016 gthb-602.131.1.exe 47kb Sony VPCEG26EG, Sony PCG-GRZ615M, Sony VGN-FE18GP, Toshiba Satellite C855-S5194, Systemax Charity PC 2010, IBM 9210WLV, HP H9-1161ez, Toshiba Dynabook C7212CMHN,, and more. Kkl Vag Com 409.1 61.1734 For Windows 7 64 bit 11/3/2014 4/6/2017 shrq-61.1734.exe 47kb Gateway GT5226j, Toshiba Qosmio X75-A, Sony VGN-FZ290FU, Compaq GU587AA-ABH SR5235NL, Lenovo ThinkPad X100e, Sony SVT21219DJB, SIE 840_P3, Lenovo ThinkCentre A58, HP RR492AA-ABE s7730.es, NEC PC-VY20MAZ78, Fujitsu Amilo M1439 Series,, and more. Kkl Vag Com 409.1 62670 For Windows 7 4/21/2016 1/4/2017 unxv-62670.exe 159kb IBM 2530A56, Lenovo 9622W4D, Dell PowerVault NX3200, M&A E10IS, HP RR492AA-ABE s7730.es, Panasonic CF-R3DW1AXS, Sony VPCEL15EN, Sony PCG-K215S, MIKROLOG Power P45-CO, Compaq GT701AA-ACJ SR5250IL, Sony VGN-NS38E_S, Sony SVE15138CGS, Gigabyte X58A-OC, IBM 26478RG,, and more. Kkl Vag Com 409.1 62907 For Windows 10 4/5/2016 1/10/2017 zpdj-62907.exe 39kb HP T3735tr-AB8 RR879AA, Lenovo 7484W76, HP DT212A-ABU M487.UK, Sony VGX-TP1V, Sony VGN-A317M, LG 15U530-GT30K, HP HP Pavilion zd7000A, IBM 23736G4,, and more. Kkl Vag Com 409.1 61.12.179 For Windows 10 64 bit 3/10/2017 jpoe-61.12.179.exe 76kb HP H8-1232, NEC PC-MY25XRGJTCBE, Sony VPCEH1Z1R, HP EG158AA-ABF m7171.f, HP P6-2475eo, Dell Dimension 9100, HP HP EliteBook 8460p, Toshiba SATELLITE C855-11C, HP HP Compaq dc7600 Small Form Facto,, and more.
If I unplug the cable from the USB port, then the report says 'Ross-Tech Interface Not Found!' So, this seems to suggest something is working OK. Also, in the 'Add or Remove Programs' facility, the 'FTDI USB Serial Converter Drivers' is listed, so this looks encouraging. I've discovered that if I select COM3 and then press Test, the window says: Port Status: OK Interface: Found! Type: Serial Pass-Through Opto/ISo: No Ross-Design: No However, the above happens even if the cable is unplugged.
So, this seems to suggest something is working OK. Also, in the 'Add or Remove Programs' facility, the 'FTDI USB Serial Converter Drivers' is listed, so this looks encouraging. Dwarkadhish serial all episodes. I've discovered that if I select COM3 and then press Test, the window says: Port Status: OK Interface: Found!
Try to ensure you use the same usb socket each time. Once you know it works it is time to buy the registered version, it's well worth the expense. I have to say their cable is a lot less aggro. I have been looking at the screenshots of the next version of VAG-COM which Uwe has posted.
With the dongle plugged in (the led lights up) and turning on the ignition to the first setting, clicking on the OBD-II returns 'Interface Not Found!' As I mentioned, the CD-ROM was cracked when delivered - although no sign of any damage to the Jiffybag or to the cable and dongle. Would be very grateful for any suggestions. Cheers, Ian Ian, mine did exactly the same. What you need to do is plug in the cable to your laptop. Now go into control panel open up or navigate to system/hardware/device manager/ports. It will probably say USB serial port (COM3 or somesuch) open up it by double clicking, go to the port settings tab and click on advanced.